Krups Open Master 404 Mode D'emploi page 7

The can may not appear to be open, as
the lid will remain on top of the can. Sim-
ply lift off the lid and carefully remove
away from the can (see figures 7, 8, 9).
The lid will remove very easily.
HELPFUL HINTS
Only circle the can once while cutting.
This will ensure optimal cutting results.
Be sure that the can is properly positioned
behind the cutting wheel; otherwise the
"Open Master" will not be able to grasp the
can.
CLEANING
One of the wonderful features of the KRUPS
"Open Master" is that it is sanitary. Because
the cutting wheel never comes in contact
with the food inside the can, there is no
greasy build up.
However, it is good practice to wipe the body
and cutting wheel after each use with a moist
cloth. NEVER immerse the "Open Master" in
water or under a running tap. Always unplug
the can opener before wiping.
LIMITED ONE YEAR WAR-
RANTY
Your KRUPS #404 is covered by the follo-
wing warranty:
If within one year from date of purchase this
KRUPS product fails to function because of
defects in materials or workmanship,
KRUPS North America will, at its option,
repair or replace the unit with our charge,
provided the owner has a proof of date of
purchase.
This warranty will be void if malfunction
was caused by damage to the product by
accident, misuse, use on frequency or volta-
ge other than marked on the product and/or
described in the instructions, abuse inclu-
ding tampering, damage in transit, or use
for commercial purposes. This warranty
gives you specific legal rights, and you may
also have other rights which may vary from
state to state.
7