Technical Characteristics; Important Safety Warnings - Fagor VTR-25 Manuel D'utilisation

interior.qxd 15/1/04

1. TECHNICAL CHARACTERISTICS

Model Voltage/Frequency
VTR-25 VTR-25M
VTR-35 VTR-35M
VTR-40 VTR-40M
VTR-40P VTR-40PM
These appliances comply with the
guidelines set out in the European
Electromagnetic Compatibility Directive
89/336/EEC.

2. IMPORTANT SAFETY WARNINGS

• Before using the appliance for the first
time, read this instruction manual
carefully and keep it for later reference.
• Before using the appliance, ensure that
the domestic mains voltage is the same
as that indicated on the appliance itself.
• On removing packaging, check the
appliance is in perfect condition. In
case of doubt, contact the nearest
Technical Assistance Service.
• This appliance is for domestic use only.
Do not use it out of doors.
• In case of breakdown or
malfunctioning, switch off the appliance.
Do not attempt to repair it. If any repairs
are necessary, they must be done by a
Technical Assistance Service
authorised by the manufacturer. Insist
on the use of original spare parts.
• The user must not replace the cable. If
it is damaged or needs replacing, this
must only be done by a Technical
Assistance Service authorised by the
manufacturer.
• The manufacturer holds no liability for
any damages arising from unsuitable or
improper use of the appliance or from
repairs carried out by non-qualified
personnel.
• This appliance must not be used in
bathrooms or showers or in damp
spaces. Do not use it in areas with a
temperature of over 40ºC.
• Do not use the appliance if the cable or
plug are damaged.
18:36 Página 4
GB
Power
230V~50Hz 40W
230V~50Hz 45W
230V~50Hz 60W
230V~50Hz 60W
• Do not pull on the cable to remove the
plug.
• Before plugging in the appliance, press
the "0" button to ensure it is in stop
position.
• Unplug the appliance when not in use,
before cleaning or maintenance and
before moving the appliance.
• Keep the appliance out of reach of
children and disabled people.
• Do not push any objects through the
protection grille.
• Do not place the fan beside sources of
heat or on hot surfaces.
• DO NOT SUBMERGE THE
APPLIANCE IN WATER.
3. ASSEMBLY INSTRUCTIONS
Before assembling the fan, take the
different parts out of the packaging and
check that the supply cable is not
damaged and that the appliance has not
received any knocks during transport. If
the appliance is damaged, do not switch it
on.
1A.-ASSEMBLING THE BASE
1A1.- MODELS: VTR-25 / VTR-25M /
VTR-30 / VTR-30M / VTR-40 /
VTR-40M
1- Remove the nut from the bottom
of the motor support.
2- Mount the motor support on the
base and fix it in place with the
nut.
1A2.- MODELS: VTR-40P / VTR-40PM
1.- Remove the nut screwed onto
the shaft.
2.- Mount the shaft on the base
support and fix it in place with
the nut.
3.- Insert the four legs making up
the base into the support.
4.- Loosen the screw and pull the
inner shaft up to the desired
height. Then tighten the screw
again. Place the motor support
on the base and fasten it in
place with the fixing screw.
5