LENCO PIR-645 Mode D'emploi page 13

Preset Operation
Preset Store
Select the station that you wish to store, press Preset 1 - 3 button until the display show
"Preset stored". Or press Preset 4+ button until the display show the preset menu, turn
"-Vol+/OK/Tune" knob to select which preset number you wish to store in, then press
"-Vol+/OK/Tune" to store the current station.
Preset Recall
To recall Preset station, simply press Preset 1 - 3 button once to recall it.
To recall other preset stations, press Preset 4+ button the display will show the preset
menu, turn "-Vol+/OK/Tune" knob to select which preset station you wish to recall, then
press "-Vol+/OK/Tune" to recall the stored station.
Note: Internet radio and Podcasts share the same preset station number.
Bluetooth Mode
This mode allows you to use the radio as a speaker for an external Bluetooth compatible
device (e.g. mobile phone or MP3 player). The signal is transmitted wirelessly via
Bluetooth.
Note: Before playback, you must pair the radio (in this case the Bluetooth receiver) and
the device (transmitter).
1. Press the power button to turn your radio ON.
2. Press the Mode button to select Bluetooth Audio mode. The device is now in
Bluetooth mode.
3. For initial use, to enter the Bluetooth pair mode, press and hold Info/Menu, turn
"-Vol+/OK/Tune" knob to select 'Setup Bluetooth', and then press "-Vol+/OK/Tune"
knob to confirm. You will see "Please connect with a device to: Lenco PIR-645".
Note: To quick enter the Bluetooth pair mode, press and hold "-Vol+/OK/Tune" knob, until
you see "Please connect with a device to: Lenco PIR-645".
4. Turn on Bluetooth on your external device.
5. Pair your external device with the 'Lenco PIR-645'. The devices will now be connected.
6. Play a track on your external device to hear sound.
7. Use the "-Vol+/OK/Tune" on the radio to adjust the volume accordingly.
13