DigiSender DG300 Guide D'installation page 15

TROUBLESHOOTING
Sound Problems
I can see the picture but
can't hear anything.
The sound is distorted.
There is a hissing sound
and the volume must be
turned up high on the
second TV to hear
anything.
DG300 - DigiSender® Long Range Video Sender System
1. Disconnect both the transmitter
AND receiver RCA Phono cables.
Reconnect the leads ensuring they are
pushed into the sockets firmly.
2. If you are using a home cinema
DVD player with surround sound,
please ensure the analogue audio
output is switched on.
Turn down the volume on the source
device such as your satellite/cable
receiver or DVD player.
1. Turn the output volume UP (if
possible) on the source equipment,
such as your satellite/cable receiver
or DVD player.
2. Ensure the transmitter and receiver
are within the usable range
3. Switch off your microwave oven if
present.
ENGLISH
Page 15