Installation Options - DigiSender DG300 Guide D'installation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ENGLISH
DG300 - DigiSender® Long Range Video Sender System

Installation Options

1. Single Source Installation
Basic setup consisting of 1 Transmitter and 1 Receiver.
Transmitter
Receiver
For the system to function correctly, both the Transmitter and Receiver should be set to the same
Audio/Video Channel.
2. Multiple Source Installation
When using multiple Transmitters within the same installation you can select
which Transmitters signal you wish to output at the receiving location, by using
the supplied DigiSender® remote control.
Transmitter 1
Transmitter 2
Receiver
Each Transmitter must be set to a different Audio/Video Channel. For example, Transmitter 1 set
to Audio/Video Channel 1, Transmitter 2 set to Audio/Video Channel 2, etc.
Page 11

Publicité

Table des Matières
loading

Table des Matières