Features; Assembly - Ryobi P2705 Manuel D'utilisation

PRODUCT SPECIFICATIONS
Motor ...................................................................... 18 V DC
Width Capacity ..............................................................8 in.
Depth Capacity..............................................................4 in.
KNOW YOUR CULTIVATOR
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
KEYHOLE HANGER
Built in hanger allows you to easily and conveniently store
the unit safely out of the way.
UNPACKING
This product requires assembly.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if any parts on the Packing List
are already assembled to your product when you unpack
it. Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
could result in serious personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have carefully
inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
PACKING LIST
Cultivator (Lower and Upper End)
Front Handle Assembly
Operator's Manual

FEATURES

Speed
Low .................................................... 0-200/min (RPM)
Medium .............................................. 0-250/min (RPM)
High .................................................... 0-300/min (RPM)
LOCK-OUT BUTTON
The lock-out button prevents accidental starting.
REAR HANDLE WITH OVERMOLD
The rear handle with overmold provides added user comfort.
VARIABLE SPEED LEVER
The variable speed lever, located on top of the rear handle,
allows the cultivator to operate at different speeds. The
maximum speed can be adjusted before or during operation.

ASSEMBLY

WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this product or create
accessories not recommended for use with this product.
Any such alteration or modification is misuse and could
result in a hazardous condition leading to possible serious
personal injury.
WARNING:
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from the
product when assembling parts.
TOOLS NEEDED
See Figure 2.
The following tool (not included or drawn to scale) is needed
for assembly:
 Phillips Screwdriver
5 — English