König Electronic CMP-WNROUT50 Mode D'emploi page 17

Dynamic IP Address: Obtain an IP address from ISP automatically.
Host Name: optional. Required by some ISPs, for example @Home.
Renew IP Forever: this feature enables this product to renew your IP address automatically when the
lease time is expiring - even when the system is idle.
PPP over Ethernet: Some ISPs require the use of PPPoE to connect to their services.
PPPoE Account and Password: the account and password your ISP assigned to you. For security
reasons, this field is left blank. If you do not want to change the password, leave the field empty.
PPPoE Service Name: optional. Input the service name if your ISP requires it. Otherwise, leave it blank.
Maximum Idle Time: the amount of time of inactivity before disconnecting your PPPoE session.
Set it to zero or enable Auto-reconnect to disable this feature.
Maximum Transmission Unit (MTU): Most ISPs offer MTU value to users. The most common MTU
value is 1492.
Connection Control: There are 3 modes to select:
Connect-on-Demand: The device will connect to the ISP when the clients send outgoing packets.
Auto-Reconnect (Always-on): The device will connect to the ISP until the connection is established.
Manually: The device will not make the link until someone clicks the Connect button on the Status page.
17