Setting The Volume; Cleaning And Maintenance - Philips Avent SCD501 Mode D'emploi

6.3 Parent unit
6.3.1 Battery light
The battery light is off when the parent unit
1
is connected to the mains or the batteries
contain enough energy.
When the batteries are low, the battery light
2
Replace the batteries when they are low (see
3
'Inserting the batteries' in chapter 'Preparing
for use').

6.3.2 Setting the volume

Press the + button to increase the volume.
1
• You hear a beep each time you press the
button to increase or decrease the volume
by one level.
•
show the current volume.
8
Press the - button to decrease the volume.
2
If you hold down the - button for 2 seconds,
you set the volume to mute.
D
Note:
If the volume is set to mute, the sound level
lights show that the baby makes sounds. The
louder the sound made by the baby, the more
sound level lights light up.
7 Cleaning and
maintenance
• Do not use cleaning spray or liquid cleaners.
• Unplug the parent unit and baby unit before
cleaning.
• Clean the parent unit, the baby unit and the
adapters with a dry cloth.
8 Storage
• Remove the batteries from the parent unit if
you do not use it for more than a month.
• Store the parent unit, its adapter and the baby
unit in a cool and dry place.