Scanning Cds And Tracks; Pausing Cd Playback; Using Its Playlists; Creating A Playlist With Its Program- Ming - Pioneer SUPER TUNER III FH-P4000 Mode D'emploi

Multi-CD Player
appears in the display. Tracks will
RANDOM :ON
play in a random order within the previously
selected (multi-CD player repeat) or
MCD
(disc repeat) ranges.
4 Press ∞ to turn random play off.
appears in the display. Tracks
RANDOM :OFF
will continue to play in order.

Scanning CDs and tracks

While you are using
DSC
beginning of each track on the selected disc
plays for about 10 seconds. When you are using
(multi-CD player repeat), the beginning of
MCD
the first track of each disc is played for about 10
seconds.
1 Select the repeat range.
Refer to Repeating play on the previous page.
2 Press to select
FUNCTION
Press until
FUNCTION
display.
3 Press 5 to turn scan play on.
appears in the display. The first 10
SCAN :ON
seconds of each track of the present disc (or the
first track of each disc) is played.
4 When you find the desired track (or disc)
press ∞ to turn scan play off.
appears in the display. The track (or
SCAN :OFF
disc) will continue to play.
• If the display has automatically returned to
the playback display, select
pressing .
FUNCTION
Note
• After track or disc scanning is finished, nor-
mal playback of the tracks will begin again.
DSC
(disc repeat), the
.
SCAN
appears in the
SCAN
again by
SCAN

Pausing CD playback

Pause lets you temporarily stop playback of the
CD.
1 Press to select
FUNCTION
Press until
FUNCTION
display.
2 Press 5 to turn pause on.
appears in the display. Play of the
PAUSE :ON
current track pauses.
3 Press ∞ to turn pause off.
appears in the display. Play will
PAUSE :OFF
resume at the same point that you turned pause
on.

Using ITS playlists

ITS (instant track selection) lets you make a
playlist of favorite tracks from those in the multi-
CD player magazine. After you have added your
favorite tracks to the playlist you can turn on ITS
play and play just those selections.
Creating a playlist with ITS program-
ming
You can use ITS to enter and playback up to 24
tracks per disc, up to 100 discs (with the disc
title).
1 Play a CD that you want to program.
Press 5 or ∞ to select a CD.
2 Press and hold until
FUNCTION
appears in the display, then press
to select .
ITS
After is displayed, press
TITLE IN
repeatedly, the following functions appear in the
display:
.
PAUSE
appears in the
PAUSE
TITLE IN
FUNCTION
FUNCTION
En
Section
07
27