Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Radio Modems Wireless M-Bus AMR - Mode d'emploi / User guide version V1.8.1
6. Introduction to Radio modem AMR
The Wireless M-Bus radio modems AMR (Automatic Meter Reading) from Adeunis RF range allow you to create an independent ecosystem to
ensure the emission, transport and collection of consumption index using Wireless M-Bus protocol. This range is made of three products, all
available in several version (see ¶ Informations).
•
Wireless M-Bus transmitter AMR : allows to transmit data (index) from water, gas & electricity meters.
•
Wireless M-Bus repeater AMR : allows to repeat Wireless M-Bus frames and extend the range over several kilometers.
•
Wireless M-Bus receiver AMR : allows to receive consumption data from Wireless M-Bus transmitters AMR or Wireless M-Bus repeater
AMR and transit them to any collection device and / or operating data with a RS232 or RS485 serial port.
6.1. Operation Modes
The products of the Adeunis-RF AMR range can adapt to all types of network topologies and all modes of Automatic Meter Reading.
Pedestrian or vehicle modes : a transmission period of 10s allows to retrieve information from the entire meter fleet on a receptor such as
mobile PC, Tablet, Smartphone or industrial PDA.
This information will be available for a vehicle rolling up about 30 to 50 km / h according to the configuration of the installation.
Fixed network mode : the receiver is permanently on the site and a data transmission every 10 minutes or 12 hours is more than enough for
most applications, the specific historical (by time slot of 30 minutes) of consumption being sent every 12 hours. That said, the 10s configuration
program can be used with a fixed network in order to obtain a very precise historical consumption on the receiver.
6.2. Advantage of the AMR solution of Adeunis RF
The AMR solution of Adeunis RF is 100% compatible with the Wireless M-Bus (EN13757-3 and EN13757-4) standard. It's an open standard
where all the information needed to decode frames are present in the header of the frame itself, so no hidden information or impossible to
interpret.
In the frame, you will find information: Manufacturer, serial number, meter type, size of the index and the index itself.
This is absolutely essential as a receiver / collector will have to deal with several different meters (water, gas, electricity, energy, ...) coming from
several places (appartments, houses).
The Wireless M-Bus radio modems AMR from Adeunis RF fit most meters on the market. It automatically adjusts Wireless M-Bus frame settings
and format of the index to the selected meter and sensor.
The Wireless M-Bus module of Adeunis RF, integrated in a product receiver of a portable or fixed (for example, Receiver AMR, a box or GPRS /
ADSL collector), allows obviously to receive all information from Radio modems AMR.
7. Wireless M-Bus Transmitter AMR
•
The connection the the meters is simple via a system compatible with pulse interface. The configuration is intuitive via mechanical switches.
•
Two meters can be supported by a single transmitter AMR from Adeunis RF, allowing a significant reduction of costs of implementation and
deployment.
•
This version features a application to adjust the data transmission cycle, manage a history of consumption, to inform the leaks and alert on
fraud.
•
This document contains key recommendations for an optimal implementation of AMR transmitters from ADEUNIS RF. Compliance with
these recommendations will help you get a communication distance advertised by the manufacturer depending on the model chosen.
•
These products are 100% compatible with European Wireless M-Bus protocol (EN13757-4 and EN13757-3), and use the T1 mode at a
frequency of 868.950MHz.
•
These products use a lithium battery to ensure a long product life more than 12 years under standard conditions of use.
Note: By default, the radio modems AMR use T1 mode (868.950MHz). If you want to use another mode (S1, R1) thank you for contacting us
Page
33
of 48
Publicité
Table des Matières
