AEG HK764070FB Notice D'utilisation page 11

beginning and then continues to cook at the
desired heating setting.
To activate the function the
cooking zone must be cold.
To activate the function for a cooking
zone: touch (
touch a desired heat setting. After 3 seconds
comes on.
To deactivate the function: change the
heat setting.
5.7 Pause
This function sets all cooking zones that
operate to the lowest heat setting.
When the function operates, all other
symbols on the control panels are locked.
The function does not stop the timer
functions.
Press to activate the function.
comes on. The heat setting is lowered to
1.
To deactivate the function: press
previous heat setting comes on.
5.8 Timer
You can set one timer function for each
cooking zone separately. To set a timer
function for the zones on the left side use the
timer on the left, for the zones on the right,
the timer on the right.
Count Down Timer
Use this function to specify how long a
cooking zone should operate during a single
cooking session.
First set the heat setting for the cooking zone
and then set the function.
To activate the function or change the
time: touch quickly again and again until
the indicator of a given zone lights up on
the display. Then touch
time (00 - 99 minutes). The function starts
automatically after 4 seconds.
the display.
comes on). Immediately
. The
or to set the
comes on
To activate the timer function for the second
zone in a pair touch
When the time comes to an end, a signal
sounds and 00 flashes. Touch
signal.
To see the remaining time: touch
To deactivate the function: choose the
desired zone touching
The remaining time counts back to 00. The
symbol goes out.
CountUp Timer
You can use this function to monitor how
long a cooking zone operates.
To activate the function: for the first zone in
a pair touch twice quickly. The function
starts automatically when
activate the function for the second zone in a
pair touch 4 times quickly.
To see how long the cooking zone
operates: touch
time, at first in seconds then in minutes.
To deactivate the function: choose the
desired zone touching
The symbol goes out.
Minute Minder
You can use this function as a Minute Minder
when the hob is activated but the cooking
zones do not operate.
To activate the function: touch
again and again until the indicator
given zone lights up on the display. Touch
or to set the time. The function starts
automatically after 4 seconds.
the display.
When the time comes to an end, a signal
sounds and 00 flashes. Touch
signal.
The function has no effect on the
operation of the cooking zones.
3 times quickly.
to stop the
.
and then touch
lights up. To
. The display shows the
and then touch
quickly
of a
comes on
to stop the
ENGLISH
.
.
11