Disposal And Environmental Protection; Ordering Spare Parts; Repair Service; Ec Declaration Of Conformity - IKRA BHSN 602 Manuel D'utilisation

Disposal and environmental protection

Should your tool become unserviceable or if you no
longer require it, do not dispose of it under any circum-
stances in your normal household waste, but rather in an
environmentally friendly manner. Empty the oil and petrol
tank carefully and take the leftover fuel to a collection
point. Please (also) take the tool to a recycling centre,
where the plastic and metal parts can be separated out
and sent for recycling. You can also obtain information
on this by contacting your local authority or city council.

Ordering spare parts

If you need accessories or spare parts, please contact our
Service department.
When working with this tool, do not use any accessory
parts other than those recommended by our company.
Otherwise the operator or others in the vicinity could suffer
serious injuries, or the tool could be damaged.

Repair service

Repairs to tools may only be performed by a specialist.
Please describe the fault that you have encountered
when sending the machine in for repair.
We, Ikra GmbH, Schlesierstrasse 36, 64839 Münster, Germany, declare under our sole responsibility that the
product Petrol-driven hedge trimmer BHSN 602, to which this declaration relates correspond to the relevant basic
safety and health requirements of Directives 2006/42/EC (Machinery Directive), 2004/108/EC (EMC-Guideline),
97/68/EC (Exhaust Emission Directive), last modification 2011/88/EG, 2011/65/EG (RoHS-Guideline) and 2000/14/
EC (noise directive) incl. modifications. For the relevant implementation of the safety and health requirements men-
tioned in the Directives, the following standards and/or technical specification(s) have been respected:
DIN EN ISO 10517:2009, DIN EN ISO 14982:2009
Sound power level L
WA
Guaranteed sound power level L
Conformity assessment method to annexe V / Directive 2000/14/EC
The year of manufacture is printed on the nameplate and can be additionally retrieved via the consecutive serial number
Münster, 12.09.2012
Maintenance of technical documentation: Gerhard Knorr, Kärcherstraße 57, DE-64839 Münster
GB | Operating instructions

EC Declaration of Conformity

111,8 dB (A)
114,0 dB (A)
WA
Gerhard Knorr, Technical Management Ikra GmbH
14
Warranty
For this petrol tool, the company provides the end user
- independently from the retailer's obligations resulting
from the purchasing contract - with the following war-
ranties:
The warranty period is 24 months beginning from the
hand-over of the device which has to be proved by
the original purchasing document. For commercial use
and use for rent, the warranty period is reduced to 12
months. Wearing parts and defects caused by the use
of non fitting accessories, repair with parts that are not
original parts of the manufacturer, use of force, strokes
and breaking as well as mischievous overloading of the
motor are excluded from this warranty. Warranty replace-
ment does only include defective parts, not complete
devices. Warranty repair shall exclusively be carried
out by authorized service partners or by the company's
customer service. In the case of any intervention of not
authorized personnel, the warranty will be held void.
All postage or delivery costs as well as any other subse-
quent expenses will be borne by the customer..