Guarantee; Technical Assistance - Zummo ZG14 Manuel D'utilisation

1408005 BLACK ADH. FOAM RUBBER DISC Ø28X3
1408009 BASE GUIDE (Optional)
1408014 BIN Z14
1408015 RIGHT CABINET CHUTE
1408016 LEFT CABINET CHUTE
1409001 FAUCET TRAY
1409002 FAUCET JOINT
1409003 MAGNET HOLDER
1409004 FAUCET FILTER
1409005 FAUCET ROD
1409006 SENSOR SHAFT SUPPLEMENT
1409007 MAGNET HOLDER GUIDE
1409008 FAUCET STICKER
1503002 RING MAGNETIC UNIT
2/13/9 TANK FAUCET
2/13/9-1 SEAT CUP SILICONE FAUCET
3/4/3 MID WASHER (PLASTIC)
I-84-M3x8 S.STEEL SCREW M3X8 DIN-84
I-84-M3x25 S.STEEL SCREW M3X25 DIN-84
I-125-M3 FLAT WASHER S. STEEL M3 DIN-125
I-125-M4 FLAT WASHER S. STEEL M4 DIN-125
15

GUARANTEE

ZUMMO-INNOVACIONES MECÁNICAS S.A., through its official distributor, guarantees their
machines for a period of TWO YEARS or for 200,000 squeezing cycles, valid from the date of
delivery to the distributor, in accordance with the following conditions:
This guarantee covers all material or manufacturing defects.
If any faults are found during normal use and within the guarantee period, the defective parts
will be replaced free of charge.
Repair or replacement of machine parts during the guarantee period, does not imply and
extension in guarantee expiration.
The guarantee shall be valid only when presented with the original purchase invoice.
The original parts are covered by a six-month guarantee.
This guarantee does not cover
Any damages not directly caused by a fault of manufacturing or materials.
Any damages due to incorrect installation, abuse, improper use, modifications, accidents or
negligence.
Any parts scratched due to use of improper washing.
Labour not covered by this guarantee.
Any damages caused by unauthorised staff or materials.
Any defects caused by use wearing down; in individual the following component:
x
0505016 PEEL EXTRACTING BANDS
x
2/13/9-1 SEAT CUP SILICONE FAUCET..

Technical assistance

In case of damages caused during the guarantee period, we suggest you contact the
Authorised Dealer who supplied the unit, or call ZUMMO:
E-mail:sat@zummo.es
Tel:+34.96.1301246
Fax:+34.96.1301250
Any repairs not authorized by ZUMMO during the guarantee period will cause immediate
termination of the guarantee.
I-125-M10 FLAT WASHER S. STEEL M-10 DIN-125
I-934-M3 S.STEEL HEXAGON NUT M3 DIN 934
I-934-M4 S.STEEL HEXAGON NUT M4 DIN 934
COUNTERSUNK HEAD SCREW M4x10
I-965-M4x10
DIN-965
I-985-M3 S.STEEL SCREW M3 DIN-985
I-1587-M3 S.STEEL HEXAGON DOMED CAP NUT M3
I-7981-Ø5,5X22 SL PAN HEAD SCREW Ø5,5X22
I-7982-Ø3,5x9,5 SL PAN HEAD SCREW Ø3,5x9,5
I-7985-M4x12 DIN-7985 STAINLESS STEEL BOLT M4X12
I-9021-M4 S.STEEL WASHER DIN-9021 M4
ROD.608ZZ TREAD
T-912-M8x90 SCREW ALLEN M8x90 DIN-912
T- Ø30/15/30-
SILENT-BLOCK Ø30 15/30MM-M6
M6
V0070 ALLEN KEY 5mm
V0071 ALLEN KEY SUPPORT
V0133 JUICE TRAY WASHER
HOPPER FRUIT CLASSIFIER STICKER 50-
V0163
75
HOPPER FRUIT CLASSIFIER STICKER 70-
V0164
90
V0177 CLEANING STICKER ZV25
21