Free Spirit In-Ground Fence FS-FENCE-17 Mode D'emploi page 8

Double Loop Layout
With a double loop layout, the boundary wire starts at the transmitter, advances out to the yard and continues to form a boundary zone in
one section of your property (e.g., front yard only) (4E-4G). Then the wire makes a U-turn back along the same path, leaving about 1.5 m
between the outgoing and incoming portions (4E), and connects back to the transmitter.
Layout Samples
4D
Sample 2 (Single Loop): Full Perimeter Loop Using an Existing Fence
4F
Sample 4 (Double Loop): Front Yard Boundary Only
8
4E
1.5 m
Place Transmitter Inside
Sample 3 (Double Loop): Front Yard or Back Yard Only
4G
Sample 5 (Double Loop): Wire Loop Attached to an Existing Fence