Reflexion Lift 2.0 Manuel Du Propriétaire page 4

safety precautions and usage statements
or approximately 10% duty cycle. Attempting to circumvent or
exceed this rating will shorten the life expectancy of the product
and may void the warranty.
Weight Limits:
The recommended weight limits on the Reflexion
Twin Long / Full / Queen: 650 pounds
Maximum weight the bed can support per person is 250 pounds
with the weight evenly distributed across the head and foot
sections. This product is not designed to support or lift this
amount of weight in the head or foot sections alone. NOTE:
Exceeding the recommended weight restrictions could damage
your Reflexion Lift 2.0 and void your warranty. For best
®
performance, you should enter and exit the Reflexion
while it is in the flat or fully lowered position.
Reflexion Lift 2.0 fits easily inside bed frames, furniture beds
®
and platform beds that are certified to hold a minimum of 850
pounds. If using this adjustable base without the legs and
placing directly on a bed frame or platform bed, cross-bed
supports (slats) are strongly recommended to ensure Reflexion
Lift 2.0 maintains stability during operation.
Exceeding this weight restriction could damage the bed
and/or cause injury and will void the warranty.
Acoustics:
In normal base operation the wheels, which allow the bed to
maintain its distance from the wall, will make contact with the
steel platform supports of the base creating a contact noise.
When entering, exiting or shifting weight on the base, this
contact noise may be audible as the wheels make contact. This
is normal.
Fabric Care:
To prolong the life of your fabric, protect from direct sunlight
whenever possible. For spot cleaning, wipe area with a light
2
damp sponge or vacuum with a soft brush attachment to
remove particles. Keep at a minimum of 30cm (12 inches) away
from direct heat sources.
For deeper cleaning, blot liquid spills with a clean dry cloth.
Wipe with a clean cloth dampened with warm water. Do not
Lift 2.0 are:
®
wet excessively. A soft bristle brush may be used to remove
ingrained soil. Avoid scratching by gentle brushing. Wipe with a
clean cloth dampened with warm water to remove residues after
brushing. Dry in shade away from direct heat.
If persistent marks remain visible after cleaning, seek
professional advice.
SAVE THESE INSTRUCTIONS.
Lift 2.0
®
®