Sony M-Crew PCLK-MN10A Mode D'emploi page 15

Setup for Windows 2000
Note
Be sure to log on through the administrator's account to install and set up a
device.
1 Installing the USB driver
Start up Windows, and then quit any active applications.
1
Hook up the system (page 7).
"Found New Hardware Wizard" appears.
2
Click "Next."
Note
It may be necessary to install three or more drivers for certain devices
before installing the PCLK-MN10-dedicated driver. The name of each
device for which a driver must be installed will appear in the dialog box.
b
b
Installing the standard driver supplied with Windows
for a device other than the PCLK-MN10
When requested to do so, select "Search for a suitable driver
for my device (recommended)." option. Then follow the
instructions displayed by the wizard. Be sure to have on hand
the Windows 2000 CD-ROM containing the required driver.
Installing the PCLK-MN10-dedicated driver
When "PCLK-MN10" appears in the dialog box, click "Next,"
and then load the M-crew CD-ROM into the CD-ROM drive.
A driver must be installed
for this device
15 GB