Preparing For Use - Philips FC6076 Mode D'emploi

Keep the appliance out of the reach of
children.
The voltage on the contact strips in the
charging unit is low (max. 12 volts) and
therefore not dangerous.
Never block the exhaust openings while
vacuuming.
Switch the appliance off when recharging it.
When the appliance has been used to suck up
liquids, empty and dry the dust compartment
before storing the appliance in the charging
unit.
To avoid the risk of electric shock, be careful
when drilling holes in the wall to attach the
charging unit, especially close to a wall socket.

Preparing for use

C
1 Screw the charging unit to the wall with
the screws supplied with the appliance.
You can also place the vacuum cleaner and the
charging unit flat on a table during charging.
C
2 The crevice tool and the squeegee can be
attached to the charging unit by pushing
them into the appropriate fastening slots.
ENGLISH
7