Temperature Sensor Error Codes; Vacation Mode - AGA marvel MP24FAS4 Série Instructions D'installation, D'utilisation Et D'entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

USING YOUR ELECTRONIC CONTROL

Temperature Sensor Error Codes

The temperature sensors are monitored continu-
ously. Any OPEN or SHORTED circuit condition will
initiate an ERROR CODE as listed below:
Displayed
Sensor
Code
Single Zone
Temperature
Sensor
Defrost
Sensor

Vacation mode:

This operating mode can be used to save energy
during high cost energy periods, or when you won't
be using your appliance for an extended period
of time by disabling the lights, alarm tones, and
keypad entry tones. Vacation mode also serves
as a Sabbath mode, disabling functions and its
controls in accordance with the weekly Sabbath
and religious holidays observed within the Orthodox
Jewish community. When used as Sabbath mode,
you may open or close the door at any time to ac-
cess contents without concern of directly turning on
or off any lights, digital readouts, solenoids, fans,
valves, compressor, icons, tones, or alarms.
When activated, the display, alarm indicators and
tones, keypad touch tones, interior lights, and
all options are disabled. All keypad functions are
disabled, with the exception of the "On/Off" keypad
which is required to exit Vacation mode. Storage
compartment temperatures are monitored and
controlled at the settings prior to entering Vacation
mode.
To enter Vacation Mode (with the control out of
sleep mode), press and hold the "On/Off" keypad
until the display goes past "OFF" and reads "VAC".
The display will flash "VAC" 3-times to acknowledge
your request, then will display "VAC" continuously
until Vacation mode is exited. A power outage will
not exit Vacation mode, exiting can only be accom-
plished manually. To exit Vacation mode and return
to normal operation, press and hold the "On/Off"
keypad until the control displays the temperature.
Temperature Sensor Error Codes
Error
Description
Failed temperature sensor in the
single zone compartment. Can lead
to unwanted storage temperatures
and/or spoiled perishable goods.
Failed defrost temperature sensor.
Causes unit to not defrost properly
and can create large frost build-up.
Can lead to water damage to the
unit and surrounding floor.
11
Action to Take
Call service to have the
temperature sensor replaced
and remove all perishable goods
from compartment to prevent
spoilage.
Unplug the power cord
immediately and call service
to have the defrost sensor
replaced.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Mp24fap4 série

Table des Matières