Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
209920A VOKKERO SQUADRA 8 CEE REFERES - Mode d'emploi / User guide version V1.1.1
7.
Functions directly accessible via the terminal
7.1. Adjusting the listening volume
The listening volume setting can be accessed directly via the Vokkero® Squadra terminal. There are
11 adjustable volume levels, ranging from a value of 0 to 10.
NB: The values 9 and 10 must be used with care, and only in very noisy environments.
Procedure:
•
When using your terminal, use the "+" and "-" keys located on each side of your terminal in order
to adjust the listening volume level of your earpiece.
•
The current level as well as the Speaker icon will be displayed on the terminal's screen.
7.2. Viewing the communication channel used
The channel used by the Vokkero® Squadra terminal can be viewed on its LCD screen.
Procedure:
•
Simultaneously press the terminal's "+" and "-" keys for 3 seconds.
•
The channel will be displayed as well as the abbreviation "C" if it is a Class 1 channel, or "C !" if
it is a Class 2 channel.
•
After 5 seconds, the LCD will automatically return to the screen saver.
7.3. Viewing the terminals connected to the network
It is possible to view all of the terminals connected to the network created in such a way as to ensure
that all the parties involved are indeed at the conference.
Procedure:
•
Simultaneously press the terminal's "+" and "-" keys for 3 seconds.
•
When the channel is displayed, press the "+" key once.
•
Your terminal's screen will then display all of the terminals connected to the network, as well as
the Antenna icon.
•
When all the terminals have been displayed, the LCD will automatically return to the screen
saver.
7.4. Modifying the role number
In order to operate correctly, the audio conference absolutely must have a terminal whose role num-
ber is "1".
If this terminal falls off-line (for example, due to a power supply problem or an operating fault), the
conference will no longer be possible. The "role number modification" function enables this situation
to be overcome by making it possible to modify a terminal's role number by assigning it Role No. 1.
NB: This function should only be used if the terminal that has role No. 1 is no longer functioning and
the configurator is not accessible!
Procedure:
•
Simultaneously press the terminal's "+" and "-" keys for 3 seconds.
•
When the channel is displayed, press the "+" key twice.
•
Your terminal's screen will then display the number "1" flashing on and off.
•
In order to confirm the terminal's shift to role 1, press the terminal's "On/Off" key.
•
After confirmation, the LCD will return to the home screen.
Page
46
of 54
Publicité
Table des Matières
Dépannage
