Introduction; Installation Procedure For The System - Vokkero Squadra Mode D'emploi

209920A VOKKERO SQUADRA 8 CEE REFERES - Mode d'emploi / User guide version V1.1.1

Introduction

The operations described below enable you to implement your Vokkero® Squadra communication system quickly
and easily.
All the operations described are common to the versions of the Vokkero® Squadra terminal listed below:
ARF7794A
Note: Your product reference is to be found on the label on the back of your terminal's casing.
The system consists of three main items:
• The terminal
• The configurator
• The charger
All the operating parameters of the Vokkero® Squadra system are managed by the configurator. This provides
access to the settings menus via a touch screen. In order to function, the configurator must be connected to one or
more chargers and the charger(s) must be connected to the power supply unit.

Installation procedure for the system

• Connect the configurator to the charger(s).
• Connect the power supply unit to the last charger (if several of them are in series).
• Connect the power supply unit to the mains.
• Connect the Vokkero® Squadra terminals as shown below.
Note 1: The order and the position of the terminals on the charger(s) is unimportant.
Note 2: If the purpose of the operation is solely to charge the terminals, then there is no need for the configurator.
Vokkero® Squadra terminal
Power supply
Configurateur
Charger(s)
EN
Page 29 of 54