Liste De Paramètres - Jung FM ST 50 UP Instructions D'utilisation

Récepteur variateur 1-10 v
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

eNet
Récepteur variateur 1-10 V
Charge capacitive
Raccord
unifilaire
à fils minces avec embout
Dimension Ø×H
Longueur totale du câble de charge
Longueur totale Ligne de commande
Fréquence radio
Puissance d'émission
Portée émetteur en champ libre
6.2 Liste de paramètres
Settings window
Device settings
Parameters
Manual commissioning
Repeater mode
Settings, channel
Parameters
Manual commissioning
Operating mode
Local Operation
82581013
J:0082581013
Setting options, Basic set-
ting
On, Off
Basic setting: On
On, Off
Basic setting: Off
Setting options, Basic set-
ting
On, Off
Basic setting: On
Normal operation
Continuous on
Continuous off
Basic setting: Normal Opera­
tion
On, Off
Basic setting: On
6/11
690 VA (560 µF)
0,75 ... 4 mm²
0,75 ... 2,5 mm²
max. 100 m
max. 100 m
max. 20 mW
Type 100 m
Explanations
Blocks manual commissioning
for the device channel.
Note: In the "Off" setting, the
device cannot be reset to the
factory setting.
In addition to its other func­
tions, the device can be used
as a repeater. In the "On" set­
ting, the device repeats all the
received telegrams.
Explanations
Blocks manual commissioning
for the device channel.
Note: In the "Off" setting, the
device cannot be reset to the
factory setting.
Normal operation
The output can be operated
with radio transmitters and the
Prog button.
Continuous on
The output switches to conti­
nuously "On". All operations of
radio transmitters and the
Prog button are ignored.
Continuous off
The output switches to conti­
nuously "Off". All operations of
radio transmitters and the
Prog button are ignored.
Blocks the output for operation
using the Prog button.
53×28 mm
868.3 MHz
13.03.2014

Publicité

Table des Matières
loading

Table des Matières