E.zicom E.ziclean FURTIV Manuel Utilisateur page 25

E.ziclean FURTIV by E.ZICOM
Manuel Utilisateur – User Manual
6. Replacement of Battery:
Battery replacement of the Cleaner:
Release the screw with the screwdriver,
open its base plate and then take out the
battery. (Refer to Figure 1 and Figure 2)
Please place the positive and negative
electrode correctly for fear of the damage
due to wrong electrode! Please set the
Cleaner in charging state to keep the best
of the battery while the Cleaner is unused.
Battery replacement of the Space
Isolator:
spin the pivot as per figure 1 and the
cover will open.
Please place the batteries (not included)
with correct polarity (+/-)
(Refer to Figure 2)
The right place of battery. (Refer to
Figure 3)
Please take out the battery if it was
unused for long.
Battery replacement of the remote
control:
Open the battery cover and then replace
the battery. (Refer to Figure 1)
Please place the batteries (not included)
with correct polarity (Refer to
Figure 2)
Please take out the battery if it was
unused for long.
E.ziclean FURTIV by E.ZICOM
Manuel Utilisateur – User Manual
Please don't forget to take out the battery before discarding the Cleaner. Please remember
to turn off the switch before taking out the battery from the Cleaner and Space Isolator.
Please don't place the battery in the high-temperature environment above 45 ℃ or in the
water.
Please don't exert external force to the battery or drop them from high place.
The battery should be recycled with safe disposal. Please don't discard it freely or throw it
into fire for fear of explosion!