E.zicom E.ziclean FURTIV Manuel Utilisateur page 20

E.ziclean FURTIV by E.ZICOM
Manuel Utilisateur – User Manual
4. Installation of Docking station and Charging for the
cleaner:
Automatic recharging:
Install the Docking Station on the flat
ground,firmly and against the vertical wall
(fixed on the,wall with the docking station
sticker).
No obstacle or hollow areas 3m away from
the,Docking Station in the front and 0.5m
on the,right and left. (Refer to Figure 1)
The Cleaner cannot search the Docking
Station,for charging if the infrared signal
E.ziclean FURTIV by E.ZICOM
Manuel Utilisateur – User Manual
transmitting,window of the recharger is
covered.
Connect the output terminal of the adaptor
with,DC socket of the Docking Station.
(Refer to,Figure 2)
Please place the power cord of the
adaptor along the wall, or it may
interfere with the brush or wheels.
Manual charging:
You can use the adaptor or Docking Station
of the Cleaner to charge for the main body
directly.
Connect the output terminal of the adaptor
with DC socket of the main body while using
the adapter for charging. (Refer to Figure 1)
Before charging, connect the adaptor with
the Docking Station , make sure the cleaner
abut against the Docking Station. (Refer to
Figure 2)