E.zicom E.ziclean FURTIV Manuel Utilisateur page 21

E.ziclean FURTIV by E.ZICOM
Manuel Utilisateur – User Manual
Press DOCKING in the remote control if you
want to charge for the main body, the
Cleaner will search the Docking Station for
charging within available scope
automatically. (Refer to Figure 3)
Press any key in host panel or POWER OFF
and DOCKING keys in the remote control
while the Cleaner is searching for the
Docking Station, the Cleaner will then stop
searching.
After the battery is used up, the first grid of
the charging icon will flicker, when the
second and then the third grid will flicker
showing it is charging, stop flickering after
completing the charging. (Refer to Figure 4
and Figure 5)
Turn on the Cleaner, full three grids show
enough power, one grid missing means the
decreased power, and it should be charged
after three grids missing. (Refer to Figure
6)
E.ziclean FURTIV by E.ZICOM
Manuel Utilisateur – User Manual
The Cleaner may fail to find the Docking Station due to the obstacle, decreased
battery and complex condition, so the Docking Station should be put in wide
space.
When the cleaner finish cleaning , the temperature of the battery is very high; so
.
charging time will be longer