Favero CONSOLE-300 Mode D'emploi page 8

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Depending on the selected sport, you can program all or only some of the parameters indicated
below.
Parameter
Time-1
Duration [0:00 ~ 99:59] and counting mode
[forward, backward] of time 1 assigned to the
period.
Time-2
Duration [0:00 ~ 99:59] and counting mode
[forward, backward] of time 2 assigned to the
period.
Time-3
Duration [0:00 ~ 99:59] and counting mode
[forward, backward] of time 3 assigned to the
period.
Timeout-1
Duration [0 ~ 99 seconds] of timeout 1.
W.Tout-1
Sound before [0 ~ 99 seconds] end of timeout
1. Set to 0 to disable the sound.
Timeout-2
Duration [0 ~ 99 seconds] of timeout 2.
W.Tout-2
Sound before [0 ~ 99 seconds] end of timeout
1. Set to 0 to disable the sound.
Penalty-1
Duration [0:00 ~ 9:59] of penalty 1 time.
Penalty-2
Duration [0:00 ~ 9:59] of penalty 2 time.
3.3.
Communication with LED scoreboards
If you want to connect the Console-300 to the scoreboards by cable, you can use a standard
straight-through network cable, Cat. 5 UTP or Cat. 6 UTP, (EIA/TIA-568A/B).
Connect the cable to one of the two "Data Serial Output" connectors located on the back of the
console.
Use the supplied splitters to connect all the installed LED boards. You can freely choose the
connection topology you prefer: "star", "backbone", "tree", etc.
You can use indifferently one or both "Data Serial Output" outputs present on the back of the
console (see Fig. 2.1); each output can control up to 8 LED boards at a distance of 200m.
Fig. 3.3: Examples of cable connections.
If you have tailor-made cables or in environments where the presence of electric devices may
cause disturbances (such as electric motors, compressors, air conditioners, inverters, radio
links, etc.), it is advisable to connect each cable conductor as indicated in Fig. 3.4.
Avoid passing the cable through the same cable conductor used for the power grid cables.
Description
Parameter
Shot-Time1 Duration [0 ~ 99 seconds] of shot time 1.
Shot-Time2 Duration [0 ~ 99 seconds] of shot time 2.
0.1s-L.min
During the last minute of countdown the
scoreboard chronometer shows tenths of
seconds[Yes / No].
Set Number Tennis: number of game sets [3 / 5].
Automatic
Tennis: score automatic increase [Yes / No].
Tie-Break
Tennis: tie-break in the last set [Yes / No].
Description

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

307-01

Table des Matières