Volleyball; Programming The Parameters; General Parameters - Favero CONSOLE-300 Mode D'emploi

2.5. Special functions for some of the sports
Special functions available for some of the sports are described below.
Tennis
It is possible to enable automatic increase of games and sets using the parameter "Automatic" [Yes / No] in the
programming menu (see Chap.3.2).
FOULS
With the
other
can increase the number of sets won by the player; with the
the scores to zero and automatically updating the number of sets won.
When operating in manual mode, press

Volleyball

With the
PERIOD
number of sets won; with the
3. P
ROGRAMMING THE PARAMETERS
The general parameters and the specific parameters for each sport can be set through two different menus. In
these two menus, with
[+] you can modify its value (keep them pressed to change the value rapidly).
F3
3.1.

General parameters

PROG
Press for at least 2 seconds to open the programming menu; press it again to exit the menu.
IN-OUT
Parameter
Sound volume
ScBrd lumin.
3.2. Specific parameters of the sports
PROG
Press to open the programming menu (Fig. 3.1 and Fig. 3.2); press it again to exit the menu.
IN-OUT
Press [-] and
F2
Press [ ] and

F1
Press [-] and
F2
(1) : previous programmable parameter
F1
(2) : to decrease the value
F2
(3) : to increase the value
F3
(4) : following programmable parameter
F4
(5) Selected sport
Fig. 3.1: Example of the programming menu (1
F E D
AVERO LECTRONIC ESIGN
button you can increase the number of games won by the players; with the
button you can pass to the next set by setting the scores to zero and automatically updating the
FOULS
button you can manually modify the number of sets won.
other
[ ] and
F1 
Description
Scoreboard volume [0 ~ 4]; it is off when
it is set to [0].
Scoreboard brightness [0 ~ 9].
[+] to select the desired sport (Fig. 3.1).
F3
[ ] to choose the parameter to be modified (Fig. 3.2).

F4
[+] to modify the parameter chosen (Fig. 3.2).
F3
PERIOD
to activate and deactivate the tie-break.
F5
[ ] you can select the desired parameter, while with
F4 
Parameter
Sound time
Day time
(5) Identifier of the programming step
(6) Parameter name
(7) Parameter value
Fig. 3.2: Programming menu (following parameters)
st
parameter)
7 / 44
button you can pass to the next set by setting
Description
Scoreboard sound duration [0 ~ 4 seconds] before
and at the end of timeout.
Day time [0:00 ~ 23:59] to be set on the
scoreboards. To update the scoreboard time press
.
F5
00307-M01-01-ML - Console-300 User Manual
ENGLISH
TIME
button you
OUT
[-] and
F2