Program, Mode; Other Features; Clock Setting - AudioSonic HF-1253 Mode D'emploi

Playback
• Plug or slot in USB device to the port. (Make sure no disc on disc tray)
• Set the "FUNCTION" selector to "CD / MP3" mode.
• Press and hold the "PLAY / PAUSE" button for a few seconds to entry USB mode.
• Playback will start automatically from the first track.
• Press the "STOP" button when finished.
• Press the "PLAY / PAUSE" button again, playback will start from the first track.

Program, mode

The operation of PROGRAM, MODE are as the same as that of CD / MP3.
Please refer to CD / MP3 OPERATION.

OTHER FEATURES

Clock setting

• Press the "TIME SET" button. (Do not release "TIME SET" button during time setting)
• Press the "HOUR" button to set hour.
• Press the "MINUTE" button to set minute.
• Release all button to confirm setting. Confirmed setting will on the display.
Aux in
• Use a 3.5mm Male-to-Male Stereo cable to connect any external audio device
with a 3.5mm Headphone or Ling-Out jack to the AUX IN jack on the front panel
of the stereo.
• Start playback on the external audio device. Adjust the volume on the audio
device (do not set the volume too high to avoid distortion). You may also adjust
the volume on the appliance.
• To control playback function, use the controls provided by the external
audio device.
8
Instruction Manual