Adjusting Output Level Of The Center, Right Rear, Left Rear Speakers And Subwoofer - Yamaha RX-V995 Mode D'emploi

BASIC OPERATION
Adjusting output level of the center, right rear, left rear speakers and
subwoofer
You can adjust the sound output level of the each speaker
even if the output level is already set in "Speaker balance
adjustment" on pages 32 to 34.
Notes
Once the output level is adjusted, the level value will be the
same in all the digital sound field programs.
The value of each speaker output level you set the last time
will remain memorized even when this unit is in the standby
mode.
However, if the power cord is disconnected for more than
one week, these values will be automatically changed to the
factory default settings.
50
C E N T E R
R S U R .
L S U R .
S W F R
Speakers
CENTER
RIGHT SURROUND (R SUR.)
LEFT SURROUND (L SUR.)
SUBWOOFER (SWFR)
(Center speaker output level)
(Right rear speaker output level)
(Left rear speaker output level)
(Subwoofer output level)
Control range (dB)
MIN, –20 to +10
MIN, –20 to +10
MIN, –20 to +10
MIN, –20 to 0
If the function "1. CENTER SPEAKER" in the SET MENU
mode is set in the "NONE" position, the center speaker
output level cannot be adjusted. This is because, in this
mode, the center sound is automatically output from the left
and right main speakers.
When one of the DSP programs No. 1 to 5 is selected, the
center speaker output level cannot be adjusted.
Preset value
0
0
0
0