The Controls Of Your Wine Cooler - Danby DWC040A2BDB Guide D'utilisation Et Soins De Propriètaire

OPERATING INSTRUCTIONS
THE CONTROLS OF
YOUR WINE COOLER
1
1
: Indicator light illuminates to signify the
l
cooling mode is currently in operation.
2
Window: For viewing the temperature of the
upper zone.
3
Window: For viewing the temperature of the
lower zone.
4
°C / °F: Indicates what scale the temperatures will
be displayed in.
SETTING THE
TEMPERATURE
I M
IMPORTANT
In the event of a power
failure, wait 3 to 5 minutes
I M P O R T A N
before restarting.
2
• To switch the display between the Fahrenheit (°F) and Celsius
(°C) scale, press the
P O R T A N T
approximately fi ve(5) seconds.
• The temperature range can be set as low as 39°F (4°C) or as high
as 64°F (18°C) to suit your specifi c storage requirements. Each
press of the
T
temperature in 1° increments within the aforementioned range.
5
3
4
5
upper zone (see 'Setting the Temperature' below).
lower zone (see 'Setting the Temperature' below).
6
I
Switch: Continuous illumination.
O
and
or button will allow you to adjust the
6
Button : Used to set the temperature in the
Button : Used to set the temperature in the
To control the inner light turn ON/OFF.
Switch: Illumination only when the door is
open.
control buttons simultaneously for
6