Options - Eaton xChargeIn Manuel D'utilisation

Description of the charging station
3.4

Options

This chapter lists the possible options of the charging station.
3.4.1 RFID
The RFID reader is used for the non-contact authorization of a charging
process with MIFARE cards or tags according to ISO 14443 and ISO 15693.
Fig. 3-3: RFID
3.4.2 Key switch
The key switch is used for authorizing a charging process with a key.
Fig. 3-4: Key switch
For information about replacing the cylinder lock, see installation manual.
110
1 ... RFID reader
1 ... Key switch
xChargeIn
Operating instructions V1.04
© EATON