Basic XL BXL-AC10BL Mode D'emploi page 3

7. Alarm clock and snooze setting
At the state of the "Alarm" interface, the corresponding alarm symbol flashes. Press "S" to turn the
current alarm function on or off. After turning off the alarm function, the alarm shows"--:--", or it will
show the current alarm time.
Press the "S" key for 3 seconds to enter the hour setting, press "UP" or "DOWN" key to set the hour
and minute, press "S" to confirm. Now you can set the ring tone by pressing "UP" or "DOWN", then
press "S" to confirm.
The alarm setting for uses the same method as for .
At the time interface, if any alarm is on, it will show the symbol of this alarm, otherwise the alarm
symbol will not appear.
At the state of the time interface, if any alarm is on, press the "DOWN" key for 3 seconds to cancel or
enter all alarms with "on".
At the state of time interface, if any alarm is on, press the "UP" key for 3 seconds to cancel or turn on
the snooze setting of all alarms. The display will show the snooze symbol .
If any alarms are on, when the set alarm time is up, the due alarm sound will ring for 1 minute.
If the snooze is on, when the set alarm time is up, the alarm sound will ring every five minutes up to 3
times.
Press any key to stop the alarm or snooze.
8. Birthday celebration setting
At the state of the birthday celebration interface, the symbol will blink. Press "S" key to turn on or
turn off the current birthday celebration function. After it is turned off, it shows "--:--". Otherwise the
display shows the time of the current birthday celebration.
Press the "S" key for 3 seconds to enter the setting mode. When "Year" is blinking, press the "UP" or
"DOWN" key to set the desired year. Press "S" to confirm. Now the month will blink. Press the "UP" or
"DOWN" key to set the month and press "S" to confirm. Next the date will blink. Press the "UP" or
"DOWN" key to set the date and press "S" to confirm. Then the "HOUR" will blink Press the "UP" or
"DOWN" key to set the hour, and press "S" to confirm. The "MINUTE" will blink next, press the "UP" or
"DOWN" key to set the minute and press "S" to confirm.
(Press "UP" or "DOWN" to inquire what you have set).
At the state of the time interface, if there is a birthday celebration symbol it means the function is
on. When the time is up, the birthday song sounds lasting for one minute. Press any key to stop the
birthday celebration tune.
9. Countdown & stopwatch function
At the state of the timer interface, the symbol will blink. Press the "S" key for 3 seconds to enter the
countdown setting. The "Minute" display will blink Press the "UP" or "DOWN" key to set the desired
minute. Press "S" to confirm. When the "Second" display is blinking, press the "UP" or "DOWN" key to
set the desired second and press "S" to confirm. Use "S" again to start and pause the countdown. The
countdown function can be set from 1 second to 99 minutes and 59 seconds. When the countdown is
finished, it will sound the alarm "Bi Bi" for the last 60 seconds.
Press any key to stop the alarm sound.
At the state of the stop/pause countdown mode, press and hold the "Up" or "Down" key for 3 seconds
to pre-set the countdown time to zero.
At the state of the stopwatch interface, the symbol will blink. Press the "S" key to start the
stopwatch function.
Press the "SET" key again to pause the stopwatch function.
The stopwatch function can be set from 0 seconds to 99 minutes and 59 seconds, and then repeat.
Press and hold the "Up" or "Down" key for 3 seconds to pre-set the stopwatch function to zero.
3