Safety Instructions - erba 03168 Mode D'emploi

GB - INSTRUCTION MANUAL

1. SAFETY INSTRUCTIONS

Read this material before using this product. Failure to do so can result in serious injury. KEEP THIS
MANUAL. When giving this machine to third parties, always include this manual. We do not accept
any liabilities for accidents or damages that result from misuse. Removal/Alteration of any
safety devices or of the machine in general will result in the loss of warranty. The
buyer assumes all risk and liability arising out of his or her repairs/alterations to the
original product or replacement parts thereto, or arising out of his or her installation
of replacement parts thereto.
Make sure the shop press is in good, undamaged condition before using it.
Never use the shop press when it is damaged!
Operate the shop press with care and caution!
Do not use excessive force!
Keep your shop press clean and dry.
Do not exceed the maximum rated pressure of 20t.
Keep children away from your working area.
Use personal protective equipment such as gloves, goggles, steel capped boots, etc.
Keep your work area well lit and free of obstacles.
Make sure that the surface on which you use the hydraulic press is level and stable. Never use
the hydraulic press on surfaces that can cave in or collapse.
Make sure that the item you need to press is placed in the center of the pressing table.
Keep any bodyparts clear of the press area when operating the shop press! Risk of serious injury!
Do not leave the shop press unattended while it is pressing something and do not stand directly
in front of the press.
Never press pressure springs or similar items!
Do not use the hydraulic shop press when intoxicated (alcohol, drugs, etc).
People with no experience in operating a shop press must not use this product.
Do not modify the hydraulic press.
Always keep the hydraulic press dry and avoid rain or splashwater.
Store the hydraulic press in a dry area and with the piston completely retracted.
Do not assemble the press on your own - you need at least 2 people to assemble the press.
ERBA GmbH
A-1230 Wien
Talpagasse 6
Servicehotline: Tel: +43(0) 1 930 10 - 160 · Fax: +43(0) 1 930 10 - 960 · E-Mail: service@erba.at
Page 11
Changes, print, punctuation and other errors reserved!
Instruction manual
03168
Issue: 11/2017