Safety Instructions - erba 03047 Mode D'emploi

GB - INSTRUCTION MANUAL

1. SAFETY INSTRUCTIONS

Read this material before using this product. Failure to do so can result in serious injury. KEEP THIS
MANUAL. When giving this machine to third parties, always include this manual. We do not accept
any liabilities for accidents or damages that result from misuse. Removal/Alteration of any
safety devices or of the machine in general will result in the loss of warranty. The
buyer assumes all risk and liability arising out of his or her repairs/alterations to the
original product or replacement parts thereto, or arising out of his or her installation
of replacement parts thereto.
Never exceed the max. load capacity of the product.
The chain block is for manual operation only - never attempt to connect it to any sort of auto-
matic meachanism.
Lubricate the chain before use.
Inspect the produce before you use it. If you detect any sign of damage you must not use the
product. Do not attempt to repair the product yourself. Always contact a certified technician.
The product is equipped with an internal brake system. Never lubricate the inside of this system.
Remove any knots from the chain before using the product.
Do not lift people.
Do not stand under the load.
Never pull the chain at an angle - always pull paralell to the wheel inside the chain block.
The load must be secured tighlt on the hook.
Worn down hooks must be replaced.
Lift/lower loads smoothly and slowly.
Do not use force to free a jammed chain.
Never leave the block chain unattended while it holds a load.
The block chain is designed for 90° vertical lifting only!
Do not lift any load too high. Avoid the load touching the housing of the block chain.
Never swing the load in any direction.
ERBA GmbH
A-1230 Wien
Talpagasse 6
Servicehotline: Tel: +43(0) 1 930 10 - 160 · Fax: +43(0) 1 930 10 - 960 · E-Mail: service@erba.at
Page 9
Changes, print, punctuation and other errors reserved!
Instruction manual
03047, 03075
Issue: 06/2018