AutoAqua Smart Skimmer Security Mode D'emploi page 4

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Security Alarm
When the alarm goes off, please unplug the AC Switch rst, and then
eliminate problems.
Model
A Switch Alarm
C
Flashing blue with
audible alarm
every 2 sec.
Skimmer*
Flashing red with
audible alarm
Flashing red with
audible alarm
every sec.
Temp
Flashing red with
audible alarm
every 3 sec.
Flashing blue with
audible alarm
every 2 sec.
Flashing red with
Level
audible alarm
every sec.
Flashing red with
audible alarm
every 3 sec.
* The alarm of Smart Skimmer Security will be cleared automatically if
the skimate level goes back to normal.
Description
1. The sensor and
the wet-side
magnet are not
aligned well.
2. The skimmer
cup is not clean.
The skimate level
reaches the
sensor.
The temperature
is higher than
84 F/29 C.
°
°
The temperature
is lower than
72 F/22 C.
°
°
The sensor is
not mounted
properly.
The sensor
detects water.
The sensor
detects no water.
3
English
Action
1. Align the
magnets.
2. Clean the
skimmer cup.
Empty the
skimmer cup.
Check if the
heater or the
cooler works
properly.
Set the sensor
properly. Both
sensors must
be in/out of the
water.
Check the
water level.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Smart temp securitySmart level securitySss-120Sts-120Sls-120

Table des Matières