Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
USE (CONTROL PANEL AND DIGITAL DISPLAY)
The control panel and the digital display are in the front of the door.
When the refrigerator system is connected to power supply for the first time, all icons on the display panel will
illuminate for 2s, and the system runs in the Smart mode by default. When all the doors are close, the display
gets extinguished automatically if no button operation within 3 minutes. When the display is off, it will light up
if any door is opened or any button is pressed.
The following button operations are valid only when the buttons are unlocked and get illuminated on the display.
"Inverter" is the frequency conversion indicator. When the power is turned on, it lights up when the compressor
is working.
1.
Temperature setting
Press the temperature zone button to select the refrigerator compartment or freezer compartment until the
corresponding zone gets flickering, and then press the temperature button to set the temperature as desired.
Finally, press the OK button to validate the setting.
-
The temperature setting of refrigerator compartment cycles as following:
5℃→6℃→7℃→8℃→OF→2℃→3℃→4℃→5℃
OF indicates the refrigerator compartment is switched off, and when the OF function takes effect, the
refrigerator compartment will stop cooling.
Caution: Be sure to take all foods out of the refrigerator compartment before setting this function.
-
The freezer temperature setting cycles as following:
-18℃→-17℃→-16℃→-24℃→-23℃→-22℃→-21℃→-20℃→-19℃→-18℃
2.
Fast freeze function
1)
When the fast freeze function is enabled, the freezer temperature will be controlled at -32℃ automatically,
and after 26 hours of running, the fast freeze function gets exited. Cooling down the freezer temperature
in a rapid manner is beneficial to the prevention of food nutrition against lost and the preservation of
freshness.
Caution: Under the fast freeze mode, the freezer temperature is subjected to no adjustment.
A.
Freezer zone
B.
Refrigerator zone
C.
Temperature display
D. "Smart" icon
E.
"Inverter" icon
F.
"Fast freeze" icon
G. Temperature zone button
H. Function button
I.
Temperature button
J.
OK button
K.
Unlock button
- 9 -
Publicité
Table des Matières
