Jøtul F 480 Série Manuel D'installation Et D'utilisation page 8

ENGLISH
4.2 Installation
External air supply through the base
Through the fl oor
1. NB! If connecting the Flex Hose through a hole in the fl oor,
do not knock out the removable cover plates (Fig. 5 A).
Through the rear outlet in the base
Fig. 4
2. If connecting a fl ex hose through the rear outlet of the
base, the shelf (A) and the internal back plate (B) must be
removed fi rst.
Fig. 5
3. If connecting a fl ex hose (Ø 80 mm) for external air supply
to the external air connector beneath the burn chamber,
the removable cover plates (A) must be knocked out fi rst
8
Installation of base/pedestal on the
burnchamber
Fig. 5
4. Carefully lay the stove down on its back. Rest the stove on
a pallet and three packaging frames.
Fig.6
B
A
B
B
Fig. 7
A
5. Before installing the base, the shelf (Fig. 4-A) and internal
back plate (Fig. 4-B) must be removed. Push the base
up to the burn chamber and secure it fi rmly with the four
screws (M8 x 25 mm) and washers provided. See Fig. 7 B.
B
B