Safety Guides - Avtek USB 3.0 PTZ Guide De Démarrage Rapide

Contents
SAFETY GUIDES ........................................................................................................................................................... 6
ACCESSORIES .............................................................................................................................................................. 7
QUICK START ................................................................................................................................................................ 7
IR REMOTE CONTROLLER .......................................................................................................................................... 8
OSD MENU ..................................................................................................................................................................... 9

SAFETY GUIDES

1. Before operation, please fully read and follow all instructions in the manual. For your safety, always keep this
manual with the camera.
2. The camera power input range is 100-240VAC (50-60Hz),ensure the power supply input within this rate before
powering on.
3. The camera power voltage is 12VDC, rated currency is 2A. We suggest you use it with the original power supply
adapter supplied by the factory.
4. Please keep the power cable, video cable and control cable in a safe place. Protect all cables especially the
connectors.
5. Operational environment: 0℃-50℃, humidity less than 90%.To avoid any danger, do not put anything inside the
camera, and keep away from the corrosive liquid.
6. Avoid stress, vibration and damp during transportation, storage and installation.
7. Do not detach the camera housing and cover. For any service, please contact authorized technicians.
8. RF cable and control cable should be individually shielded, and cannot be substituted with other cables. Do not
direct the camera lens towards strong light, such as the sun or the intensive light.
9. Use a dry and soft cloth to clean the camera housing. Applied with neutral cleaning agent when there is need to
clean. To avoid damage on the camera lens, never use strong or abrasive cleaning agents on the camera housing.
10. Do not move the camera by holding the camera head. To avoid mechanical trouble, do not rotate the camera head
by hand.
11. Put the camera on fixed and smooth desk or platform, avoid leaned installation.
12. Power Supply Polarity (Drawing)
NOTE: The video quality may be affected by the specific frequencies of electromagnetic filed.
NOTE: In order to use the USB 3.0 interface please make sure that the drivers of the USB interface on your computer
are updated to the latest version. If the interface is not USB 3.0 the resolution and framerate may be lower.
6