What To Do In Case Of A Problem; Installation Instructions - BORETTI BIKF-38 Notice D'emploi

What to do in case of a problem

The hob or the cooking zone doesn't start-up
• The hob is badly connected on the electrical network.
• The protection fuse cut-off
• The locking function is activated
• The sensitive keys are covered of grease or water.
• An object is put on a key.
The symbol [ E ] displays
• Disconnect and replug the hob.
• Call the After-sales Service.
One or all cooking zones cut-off
• The safety system functioned
• You forgot to cut-off the cooking zone for a long time.
• One or more sensitive keys are covered.
• The pan is empty and its bottom overheated.
• The appliance has an automatic reducing system of the power level and an automatic cut-off
system when there is overheating.
Continuous ventilation after cutting-off the hob
• This is not a failure, the fan continuous to protect the electronic device.
• The fan cooling stops automatically.

Installation instructions

The installation comes under the exclusive res-
ponsibility of specialists.
The installer is held to respect the local legisla-
tion and standards.
How to fix the gasket:
The gasket supplied with the hob avoids all infil-
tration of liquids in the cabinet.
This installation has to be done carefully, in
conformity of the following drawing.
54
2 mm
Stick the gasket (2) two millimetres from the
external edge of the glass, after removing the
protection sheet (3).