Use And Operation - Honeywell HG Série Mode D'emploi

USE AND OPERATION

CONTROL PANEL
1) Power Control
2) Mode Control
3) Timer Control
4) Timer / Temperature
Set Controls
FUNCTION BUTTONS
POWER CONTROL
Press the to turn ON/OFF the unit. When the unit is plugged in, is in a Standby Mode and ready
to be switched on anytime.
LED DISPLAY
When the unit is in standby mode, the Display Scrren shows the current room temperature.
RESTART DELAY
If the unit turns OFF while operating in COOL mode, there will be an approx. 3-minute delay to restart
the air conditioner in COOL mode. This is a safety feature and added to help protect and extend the
life of the compressor. After 3 minutes, you will be able to turn ON the unit as usual.
FAN SPEED CONTROL
2 settings: High and Low.
Note: Fan Speed cannot be adjusted in Sleep Mode and Dehumidifying Mode.
MODE CONTROL
Settings: Air Conditioning, Dehumidifying, Fan, Heating*.
The corresponding indicator light will illuminate to indicate the current mode setting.
• Air Conditioning Mode (COOL)
Adjust fan speed and air temperature to suit your desired comfort level.
Temperature setting range is 61°F - 88°F (16°C -31°C).
(7) (6) (5)
EN
(4) (3) (2)
5) Fan Speed Control
6) Swing Control
7) Sleep Mode
7
(1)