Control Panel "Pc1 0 8 -St; Descriptions - CBE PC180-ST Instructions D'emploi

EN
CONTROL PANEL "PC180-ST"
9
10
11
12

DESCRIPTIONS

1) Mains' general button ON/OFF; LED flashing
indicates that the battery is low and that the low
voltage device will turn on.
NOTE: at start-up, the panel verifies the
functioning of all LEDs, with the exclusion of
ref. 14 and 15.
12V button ; it controls the
2)
and heating .
3) Water pump button; it controls the pump relais.
4) Awning light button;
automatically off when you start up the engine.
5) Button to check the leisure battery (B2).
6) Button to check the car battery (B1).
7) Button to check the
8) Button with integrated twilight sensor to set the
intensity of the LED backlighting in a "night"
situation (see also the "TWILIGHT" function).
12
1
5
lights , 12V sockets
the awning light switches
fresh water tank .
2
3 4
12V
6 7 8
9) If this symbol blinks the car battery (B1) has run
down.
10) If this symbol blinks the leisure battery (B2) has
run down.
11) If this symbol blinks the
empty.
12) If this symbol blinks the waste water tank is full.
13) LED display:
-Voltmeter for the control of car and leisure
battery voltage (scale 0 to 100%).
- Fresh water tank level (Emergency level, 1/3,
2/3, 3/3).
14) It shows the leisure batterie recharging through
engine alternator.
15) Led to signal 230V net on.
13
14
15
fresh water tank is