Interactive Health iJoy 300 Mode D'emploi Et D'entretien page 7

2. Attach the backrest cushion
Attach the top of the backrest cushion to the chair using the hook-and-loop strips. From the front of the
chair, push the flap located at the bottom of the backrest cushion down behind the seat.
3. Attach the head pillow
Pull the two straps located on the back of
the headrest up and over the top of the chair.
Attach the head pillow to the straps using
using the hook and loop strips. Adjust the head
pillow height for maximum comfort.
Your iJoy -300
®
requires some simple assembly
(no tools required). Just follow the instructions on this
page, and in a few short minutes you'll be set to go!
7