Grounding Instructions - Interactive Health iJoy 300 Mode D'emploi Et D'entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Grounding methods:

Grounding Instructions:

This product must be grounded. If it should malfunction or breakdown, grounding provides a path of
least resistance for electrical current to reduce the risk of electric shock. This product is equipped with
a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into
Grounded
an appropriate outlet that is properly installed and grounded in accordance with all local codes and
Outlet
ordinances.
WARNING:
Improper connection of the equipment-grounding
conductor can result in a risk of electronic shock. Check with a qualified
electrician or serviceman if you are in doubt as to whether this product
(A)
is properly grounded. Do not modify the plug provided with the product
Grounded
Pin
– if it will not fit the outlet, have a proper outlet installed by a qualified
Grounded
electrician.
Outlet Box
This product is for use on a normal 120-volt circuit and has a grounding plug that looks like the
plug illustrated in sketch (A). A temporary adapter that looks like the adapter used in sketches (B)
and (C) may be used to connect this plug to a 2-pole receptacle as shown in sketch (B), if a properly
grounded plug is not available. The temporary adapter should be used only until a properly grounded
Adapter
outlet (sketch A) can be installed by a qualified electrician. The green colored, rigid ear tab or the like
extending from the adapter must be connected to a permanent ground such as a properly grounded
outlet box cover. Whenever the adapter is used, it must be held in place by a metal screw.
(C)
Metal
Screw
WARNING:
This product is equipped with a thermal resetting protection device. This is an
added safety feature to protect you and this product from overheating. If the product should suddenly
stop and will not start, turn the main power switch, located on the back of the product, off and do not
(B)
operate the product for at least 30 minutes. Failure to turn the product off may result in the product
starting unexpectedly when the device cools.
Tab for
Grounding Screw
5

Publicité

Table des Matières
loading

Table des Matières