Turning On The Power; Connecting The Appliance - LG GSL360ICEV Manuel Du Propriétaire

global_main.book.book Page 17 Thursday, November 26, 2020 4:24 PM
Use the spanner to adjust the height by turning
a
the levelling leg to the left to raise it or to the right
to lower it.
Door Alignment for Freezer and
Fridge Door
If the door of the appliance is not level, adjust the
difference in the height of appliance door.
1
Open the door and use the spanner
loosen the keeper nut by turning it to the left.
2
Use the spanner
turning the adjustment hinge pin to the left or
to the right.
CAUTION
• Do not adjust the height of the appliance door
more than 3 mm.
3
Use the spanner
turning it to the right.
NOTE
• Leveling the doors may not be possible when the
floor is not leveled, or is of weak or poor
construction.
• The refrigerator is heavy and should be installed
on a rigid and solid surface.
• Some timber flooring may cause levelling
difficulties if it flexes excessively.
to
a

Turning on the Power

Connecting the Appliance

After installing the appliance, connect the power
plug into the outlet socket.
INSTALLATION
to adjust the height by
b
to fasten the keeper nut by
a
17