Front Panel - Numark N4 Guide D'utilisation Rapide

N4 AND SERATO DJ INTRO
WINDOWS
Before you can begin using N4 with your computer, install the Serato DJ Intro software:
1. Insert the installation disc into your computer's DVD/CD drive. (Free updates to the Serato DJ Intro software
are available online at http://www.serato.com. We recommend checking the website for the latest update of
Serato DJ Intro before installing it on your computer.)
2. Open the CD to view its contents, open the folder titled "PC" and run the installer file.
3. Follow the on-screen instructions to install the software.
To start using N4:
1. Use the included power adapter to connect the N4 to a power outlet..
2. Connect N4 to an available USB port on your computer. (If possible, use a USB port on the rear panel of your
computer.)
3. Open Serato DJ Intro by double-clicking the icon on your computer's Desktop (if you created a Desktop
shortcut) or by going to:
Windows XP: Start Menu
Windows Vista & Windows 7: Windows Menu
For more information on how to use Serato DJ Intro, please see the manual located on the disc.
MAC
Before you can begin using N4 with your computer, you must install the Serato DJ Intro software:
1. Insert the included disc into your computer's DVD/CD drive.
2. Open the CD to view its contents, open the folder titled "Mac" and run the installer file.
3. Follow the on-screen instructions to install the software.
To start using N4:
1. Use the included power adapter to connect the N4 to a power outlet..
2. Connect N4 to an available USB port on your computer. (If possible, use a USB port on the rear panel of your
computer.)
3. Open Serato DJ Intro by going to Applications
For more information on how to use Serato DJ Intro, please see the manual located on the disc.

FRONT PANEL

MIC 1 GAIN – This knob controls the microphone level being sent to the Master output.
1.
MIC 2 GAIN – This knob controls the microphone level being sent to the Master output.
2.
TREBLE – Adjusts the high (treble) frequencies for both mic inputs.
3.
BASS – Adjusts the low (bass) frequencies for both mic inputs.
4.
MIC ON/OFF SWITCH – Turns the mic channel on/off.
5.
SOURCE (PC/INPUT 3) – Toggles between playback from your computer or input 3.
6.
SOURCE (PC/INPUT 4) – Toggles between playback from your computer or input 4.
7.
CF CONTOUR – Adjusts the slope of the crossfader response.
8.
HEADPHONES – 1/8" and ¼" headphone jacks.
9.
Programs Serato
1 3 4
2
DJ Intro
All Programs Serato
Serato DJ Intro.
3
7
5 6
5
DJ Intro
4
9
8