Virtualdj Le Setup; Timecode Setup - Numark N4 Guide D'utilisation Rapide

VirtualDJ LE SETUP

PC
Before you can begin using N4 with your computer, you must install the included VirtualDJ LE software:
Please insert the included installation disc into your computer's DVD/CD drive.
1.
2. Open the CD to view its contents, Open the folder titled "PC." and double-click the ".Msi file".
Follow the on-screen instructions.
3.
To start using N4:
Use the included power adapter to connect the N4 to a power outlet..
1.
Connect N4 to an available USB port on your computer. (If possible, use a USB port on the rear panel of your
2.
computer.)
Open VirtualDJ LE by double-clicking the icon on your computer's Desktop (if you created a Desktop shortcut)
3.
or by going to Start
For more information on how to use VirtualDJ LE, please see the manual located on the disc.
Note: Full Screen video mapping is not supported in VirtualDJ LE.
MAC
Before you can begin using N4 with your computer, you must install the included VirtualDJ LE software:
Please insert the included installation disc into your computer's CD-ROM drive.
1.
Open the CD to view its contents, open the folder titled "Mac." and double-click the ".pkg" file.
2.
Follow the on-screen instructions.
3.
To start using N4:
1. Use the included power adapter to connect the N4 to a power outlet..
Connect N4 to an available USB port on your computer. (If possible, use a USB port on the rear panel of your
2.
computer.)
Open VirtualDJ LE by going to Applications
3.
For more information on how to use VirtualDJ LE, please see the manual located on the disc.
Note: Full Screen video mapping is not supported in VirtualDJ LE.

TIMECODE SETUP

To setup N4 Deck 1 for use with timecode (available only in VirtualDJ Pro):
Set the N4 rear panel USB IN REC/TIMECODE switch to 'TIMECODE'.
1.
Set the N4 front panel Source switch to "PC" to avoid hearing the timecode signal beeps.
2.
Adjust the Line/Phono switch to the appropriate setting and send a timecode signal through the N4 Input 3 or
3.
Input 4.
In VirtualDJ Pro, go to the Config menu and set the Sound Setup
4.
In Timecode Config, select a Vinyl preset that matches the timecode signal source that you are sending
5.
through the N4 input.
Adjust the settings to ensure Quality reaches 100% to control Deck 1.
6.
To setup both N4 decks for use with timecode (available only in VirtualDJ Pro):
Set the N4 rear panel USB IN REC/TIMECODE switch to 'TIMECODE'.
1.
Set the N4 front panel Source switches to "PC" to avoid hearing the timecode signal beeps.
2.
Adjust the Line/Phono switch to the appropriate setting and send a timecode signal through N4 Inputs 3 and 4.
3.
In VirtualDJ Pro, go to the Config menu and set the Sound Setup
4.
In Timecode Config, select a Vinyl preset that matches the timecode signal sources that you are sending
5.
through the N4 inputs.
Adjust the settings for Line 1 and Line 2 to ensure Quality reaches 100% to control both decks.
6.
All Programs VirtualDJ.
VirtualDJ.
Inputs tab to "Single Timecode".
Inputs tab to "Timecodes".
4