Adjusting The Volume; Quickly Attenuating The Sound; Connecting Headphones - Sony Xvm-R75 Mode D'emploi

Adjusting the Volume

You can adjust the volume of the wired headphones and connected equipment with
the supplied card remote commander.
Press (VOL)(+) or (VOL)(–) on the card remote commander.

Quickly attenuating the sound

Press (ATT) on the card remote commander.
To restore the previous volume level
Press (ATT) again.

Connecting headphones

There are two output jacks (mini phono plug) for wired headphones on the unit.
Adjust the volume using the (VOL)(+) or (VOL)(–) on the card remote commander.
Using wireless headphones
You can use infrared wireless headphones, MDR-IF5000 (optional) with the unit.
Please refer to the operating instructions for MDR-IF5000.
Note
The volume of the wireless headphones cannot be adjusted with the supplied card remote
commander. Use the volume control on the wireless headphones.
14
ATT On
ATT
VOL (volume) +/–