White Led Light Under The Edge Of The Tub (Optional); Sound (Optional); Basic Operation Of The Bath; Operation - DURAVIT Combi-System E Série Notice D'utilisation

4.7 White LED light under the edge of the tub (optional)

An LED strip is optionally available under the wide edge of the Darling New tubs. This
enhances the bathing atmosphere with soft, white ambient light.

4.8 Sound (optional)

3 structure-borne sound converters ensure optimal fidelity and enjoyment above and
under water. You can connect your music player and listen to your favourite music via
Bluetooth.

5. Basic operation of the bath

Buttons and their functions
If activated, the buttons respond with a slight vibration. If the upper or lower limits are
reached, the "+" or "-" buttons will vibrate for a longer period.
• Activate the display by holding down the button labelled "On/Off".
• All functions can be deactivated at any time by pressing "On/Off".
• Start or end individual functions by pressing function buttons labeled "Jet", "Air"
and "Light".
• Select these by holding down the function buttons in the setting menu. Change the
intensity, massage type,... with the setting buttons , + and -.
• Concentrate massage intensity at the foot or back nozzles with the selector.

6. Operation

Note! Disinfect the whirlpool system before using it for the first time, and then after
every tenth bath, and at least one a month and after a long period of no use.
26
6.1

Switching on the whirlpool tub

Note! Switch off the whirlpool tub when finished.
> Switch on the main switch.
> Activate the display by holding down the button labelled "On/Off".

6.2 Switching off the whirlpool tub

> Wait until the tub is completely drained and the 2-minute drying mode is finished
(air nozzles automatically activated, "Air" button flashes).
> Switch off the main switch.

6.3 Air nozzles

Switching on / off

> Press the "Air" button.
The nozzles are switched on/off (air massage).

Changing the massage type

> Press the "Air" button until it flashes.
Setting buttons are now activated and illuminated.
> Press the " " button.
Rotating air massage is activated.
> Press the " " button a second time.
Air massage is reactivated.

Changing massage intensity

Prerequisites: Air massage (not rotating) activated.
> Press the "Air" button until it flashes.
Setting buttons are now activated and illuminated.
> Press the "+" or "-" button.
Intensity increases and decreases.
27