Switching On The White Led Light Under The Edge Of The Tub (Optional); Cleaning And Maintenance; Disinfecting The Whirlpool System; How Often - DURAVIT Darling New Notice D'utilisation

Système air
Masquer les pouces Voir aussi pour Darling New:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 24

5.6 Switching on the white LED light under the edge of the tub (optional)

> Touch the Duravit logo.

6. Cleaning and Maintenance

Note!
Damage to the surfaces through the use of the wrong cleaning fluids or detergents.
• Only use a cleaning fluid that is recommended by Duravit.
• Never use abrasive, aggressive or chemical cleaners.
6.1

Disinfecting the whirlpool system

How often?

Disinfect the whirlpool system before using it for the first time, and then after every
tenth bath, but at least one a month and after a long period of no use.

How?

CAUTION! Chlorine bleach irritates the skin.
> Observe the safety instructions on the disinfectant.
> Do NOT bathe in the whirlpool tub while disinfecting it.
> Ensure that the room is well-ventilated during the disinfection process.
> Fill the tub with water.
> Add the chlorine bleach to the water in accordance with the manufacturer's in-
structions.
> Switch on the air nozles.
> Allow the water in the tub to settle for 5 minutes.
> Switch on the air nozles.
> Drain the water and rinse the tub.
> Fill the tub with water again.
> Switch on the air nozles.
> Drain the water.
> Repeat the process as necessary.
20

Publicité

Table des Matières
loading

Table des Matières