Ndustrio 191BR1G Manuel D'utilisation Et D'installation page 55

REPLACEMENT OF THE PILOT LIGHT INJECTOR
To carry out this operation,
proceed as follows.
1 - Turn off the gas supply
tap.
2 - Remove the knob (B).
3 - Undo the screws (C)
and remove the control
panel (D).
4 - Unscrew the union (E).
5 - Remove the nozzle (F)
and replace it with the
one suitable for the
type of gas in use (see
table at back of manu-
al).
6 - Retighten the union (E).
7 - Replace the control panel (D) and the knob (B)
on completion of the operation.
REPLACING THE WELL TILTING DEVICE
To carry out this operation, proceed as follows.
1 - Turn off the gas supply tap.
2 - Remove the knob (B).
3 - Undo the screws (C) and remove the control
panel (D).
B
C
- 25 -
D C
C
B
F
E
IDM-39616002700.tif
GB
DE
FR
ES
D C
IDM-39616002100.tif
English
IT