Helios AIR1-EVH RH Série Notice De Montage Et D'entretien page 14

Installation and Operating Instructions
EN
NOTE
Electrical pre-heater AIR1-EVH RH
A: Minimum distance for servicing the electrical pre-heater.
The electrical pre-heater can be used in both air flow directions. Determine the service side and align the pre-heater
accordingly before assembly.
1. Apply sealing strips where the module joins the unit (see Fig. 3).
2. Remove screw covers on the unit before installing the module (see Fig. 4).
3. Connect the temperature sensor (included in delivery) to the outdoor side of the pre-heater. Fasten the sensor cable
to the sheet metal part with a cable tie (see Fig. 5).
Fig .3
Fig .4
5
Fig .2
Type A (mm)
AIR1-EVH RH 1500 960
1060
AIR1-EVH RH 2000
AIR1-EVH RH 3000 1170
AIR1-EVH RH 5000 1440
AIR1-EVH RH 6000 1560
AIR1-EVH RH 8000 1810
AIR1-EVH RH 9500 1910
AIR1-EVH RH 12000 2060
AIR1-EVH RH 15000 2310
Fig .5